![[MORRISON / SHOLES] Mbn CG (De)packer with signature bypass - Version 1.1g [03/14/10] Empty](https://2img.net/i/empty.gif)
Use at your own risk!
Supported phones:
MORRISON -> DEXT / CLIQ
SHOLES -> DROID / SHOLES TABLET
Packs and Unpacks CG2 for the MORRISON.
Extracts radio.img from the MORRISON update.zip.
Packs and Unpacks CG3 for the SHOLES .
Requires .NET 3.5 or MONO 2.4.
Interface is similar to SBF Recalc, currently inactive buttons are disabled.
Current version: 1.1g
.NET 3.5: [You must be registered and logged in to see this link.]
MONO 2.4: [You must be registered and logged in to see this link.]
Unpacking and Packing:
A) Open CG.
B) Split CG. (wait until message in the box appears)
C) Do moddings to the files (in directory named "cg-extracted") *
D) Press Open Files Folder and select the "cg-extracted".
-) If needed, hit advanced menu and check "Bypass signature", which will allow flashing unsigned system, boot, userdata and recovery. (MORRISON only)
E) Press Recalc Checksum. (wait until message box appears)
G) Create CG (wait until message box appears, CG is created in cg-extracted\rebuilt folder)
Extracting radio.img:
A) Go to menu MORRISON>>Extract radio.img
B) Select desired radio.img
C) The files will be created in folde "radio.img-extracted".
The partition table must always be in the CG, it is checked by the program. Other partitions are not necessary (that is if you want to do partial flashes).
All credits to: Skrilax_CZ
Supported phones:
MORRISON -> DEXT / CLIQ
SHOLES -> DROID / SHOLES TABLET
Packs and Unpacks CG2 for the MORRISON.
Extracts radio.img from the MORRISON update.zip.
Packs and Unpacks CG3 for the SHOLES .
Requires .NET 3.5 or MONO 2.4.
Interface is similar to SBF Recalc, currently inactive buttons are disabled.
Current version: 1.1g
.NET 3.5: [You must be registered and logged in to see this link.]
MONO 2.4: [You must be registered and logged in to see this link.]
Unpacking and Packing:
A) Open CG.
B) Split CG. (wait until message in the box appears)
C) Do moddings to the files (in directory named "cg-extracted") *
D) Press Open Files Folder and select the "cg-extracted".
-) If needed, hit advanced menu and check "Bypass signature", which will allow flashing unsigned system, boot, userdata and recovery. (MORRISON only)
E) Press Recalc Checksum. (wait until message box appears)
G) Create CG (wait until message box appears, CG is created in cg-extracted\rebuilt folder)
Extracting radio.img:
A) Go to menu MORRISON>>Extract radio.img
B) Select desired radio.img
C) The files will be created in folde "radio.img-extracted".
The partition table must always be in the CG, it is checked by the program. Other partitions are not necessary (that is if you want to do partial flashes).
All credits to: Skrilax_CZ
